Fair and Honest Corporate Activities
Harmony with the Environment
Management of Intellectual Properties and Information

MX55J Series High-Speed Connectors for In-vehicle Digital Cameras Has Been Developed

MX55J Series

JAE has developed the MX55J Series high-speed transmission connectors for in-vehicle digital camera systems.

Recently, installation of in-vehicle cameras has increased for automotive applications, and so JAE has developed applicable products. A greater number of incorporated camera units, is expected to be required to support new technologies such as ADAS and autonomous driving. These advances have resulted in an increase in the volume of information, and high-definition digitalization. Therefore, there are demands for space-saving high-speed transmission compatible connectors, to help connect the increasing number of installed units.

To cater to these trending requirements, we have developed the MX55J Series compact high-speed transmission in-vehicle digital camera connector.

The MX55J Series is compatible with 1.5Gbps class video signal (LVDS) differential transmission (depending on configuration and usage) and the rear case camera connector has been minimized from our conventional product size 24mm x 27mm, to the standard in-vehicle camera size 23mm x 23mm, to meet the needs of our customers. This product also achieves the higher performance that is required for an automotive connector such as EMI suppression (GND connection structure), and high waterproof rating when mated and as an individual product. Moreover, by changing the key of the harness side connector mis-insertion can be prevented. In addition to a standard straight plug, there is a right angle plug that can be customized to any one of 4 different cable exit directions to make cable routing easier.


Note) The plug connector for this product is sold only as a cable harness and is not provided as an individual connector.

GND: Ground

Features

  • Transmission characteristic compatible with LVDS differential signals
  • Rear case connector size is a standard automotive camera size (23mm x 23mm)
  • Available as a complete harness to ensure transmission performance reliability.
    Whole surface of connector is covered with a ground shell and ground terminals for EMI control.
  • Mechanical lock and structure to resist twist force when mated.
  • Mis-insertion prevention key.
  • Cable exit orientation can be set in four directions by changing key of cable connector. (Right angle type)
    Realizes high retention strength while maintaining small size.
  • Superior waterproof performance when mated and as an individual product 100kPa, IPx9K equivalent.
  • Compatible with STQ cables
STQ: Shielded Twisted Quad Wire

Applicable Market

Automotive Camera Applications

General Specification

Series MX55J
Number of Contacts 4 position
Applications Image signal (LVDS)
Operating Temperature Range -40°C ~ + 105°C

Materials and Finishes
«MX55J»

Harness Connector

Components Material and Finish
Outer Housing PBT
Inner Housing PBT-GF30
Cover Housing PBT-GF30
Retainer PBT-GF30
Signal Terminal Copper alloy / Au plating
Ground Shell Copper alloy / Sn plating
Cover Shell Copper alloy / Sn plating
Seal Ring Silicone
Grommet Silicone
Sleeve Copper alloy / Sn plating

Rear Case Connector

Components Material and Finish
Outer Housing PA-GF33
Inner Housing PA-GF33
Signal Terminal Copper alloy / Au plating
Ground Shell Steel / Sn plating
Grommet Silicone

PCB Connector

Components Material and Finish
Housing LCP-GF35
Signal Terminal Copper alloy / Au plating
Hold-down Copper alloy / Sn plating
 

Information and details given here are as of the date of publication. Please note that the details may be changed.

This site uses cookies to improve its performance, enhance your user experience and tailor advertising. By using this site you consent to the use of cookies as described in our usage policy unless you have changed your cookie settings. Please click here for more information.