News Releases

(10.11.2018)

Variation of USB Type-C™ DX07 Series Connectors
Has Been Expanded
Addition of VR Standard VirtualLink™ Compatible Products

DX07 Series USB Type-C VR standard VirtualLink compatible by JAE electronics
(Front: 2-row SMT type On-board Receptacle, Back: Hybrid receptacle with 3.4mm center height)

 

JAE has added two new variations to the USB Type-C compatible receptacle connector line-up including a VR standard "VirtualLink" compliant type. We will supply these products as part of the "DX07 Series" family in addition to the existing receptacle and plug connectors and, cable harnesses.


As a next generation interface standard, adoption of the USB Type-C connectors is increasing in various markets such as PCs, smartphones, hand-held devices, audio visual devices, and portable gaming devices. To cater to these trending requirements, JAE has developed and launched two types of receptacles; one is a center height 3.4mm hybrid type compatible with the VR market next-generation standard "VirtualLink", and another is an improved version of the most common USB Type-C specification two row SMT on-board type.


"3.4mm Center Height, Hybrid Receptacle" (DX07S024XJ4)

Alternate Mode of the USB Type-C enables transmission of non-USB signals. This product is compatible with the new signal transmission standard VirtualLink specification (USB Type-C alternate mode).
The VirtualLink is a new standard for the VR market, which is expected to grow further in the future. It enables VR headsets equipped with high-definition displays, cameras, various censors, to connect with the main device (PCs, and set-top boxes) over a single Type-C cable. This product adopts dimensions with consideration for parallel connection with the standard USB Type-A receptacle connectors and HDMI receptacle connectors, having a compliant structure (center height: 3.4mm) so that the connector clearance height will be the same, to enhance design flexibility for customers.


"2-row SMT On-board Receptacle" (DX07S024JA1)

This product is a two row SMT on-board type receptacle with an improved resistance against twisting compared to our existing products. The two row SMT on-board type is the most popular type, which is in high demand for a wide range of markets.

Moreover, it facilitates the processing work of the connector mounting and can address the diversifying needs for our customers.

 

JAE has taken part in the development of the USB Type-C connector specification from the early planning phase and has contributed to the standardization. By using our past experiences, we will continue to expand the line-up of the compatible plug and receptacle connectors, and cable harnesses in the "DX07 Series".


Note) USB Type-C™ is a trademark of USB Implementers Forum, Inc.

Note2) "VirtualLink™" is a trademark of VirtualLink Consortium.

 


:: Features

  • list mark Compatible with USB Type-C Standard
  • list mark Supports 5A max. power supply. (Compatible with USB Power Delivery Revision 3.0)
  • list mark Supports VirtualLink (Hybrid receptacle with 3.4 mm center height)

:: Applicable Markets

Smartphones, notebook PCs, digital still cameras, VR/AR devices, printers, and others

:: General Specifications

Connector Type DX07 Receptacle Connector
Part Number DX07S024JA1 DX07S024XJ4
Contact Configuration 2-row SMT type Hybrid type
Center Height 1.57mm 3.4mm
Rated Current 5A max.
Number of Contacts 24 positions
Rated Voltage AC20V r.m.s.
Contact Resistance Initial 40mΩ max.
Dielectric Withstanding Voltage AC 40V r.m.s. (for 1 minute)
Insulation Resistance 100MΩ min.
Operating Temperature Range -30°C to +80 °C
Mating Durability 10,000 times

 

:: Links

 

  Video Series information Drawings Environmental Compliance






:: Related articles

 

News Releases(9.10.2017)
USB 3.1 Type-CTM Cable Harness with Screw Lock Has Been Developed to Add to Our DX07 Series Line-up



 

News Releases(7.24.2017)
USB 3.1 Type-C Cable Harness with Screw Lock Has Been Developed to Add to Our DX07 Series Line-up



 

News Releases(12.20.2017)
USB 3.1 Certified Type-C to Standard-A Cable Harness Has Been Added to the USB Type-C "DX07 Series"



 

News Releases(10.23.2017)
USB Type-C Certified "DX07 Cable Harness" Supporting USB 3.1 and USB Power Delivery 3.0 Now Available



 

News Releases(2.22.2017)
Variation of USB Type-C "DX07" Series Connectors Has Been Expanded



 

News Releases(3.11.2016)
JAE "DX07 Series" Receives USB Type-C Compliance Certification



 

News Releases(12.10.2015)
USB Type-C Connector "DX07 Slim Plug" Has Been Developed



 

News Releases(06.24.2015)
USB Type-C Connector "DX07 Series" Has Been Developed

 

 

News Releases(04.27.2015)
DX07 Series I/O Connector, Compatible with the Next Generation USB Type-C Specification Has Been Developed

 


Contact us

Information and details given here are as of the date of publication.
Please note that the details may be changed.