CJ2 Series

NEED ASSISTANCE?

Frequency range to 3GHz, high density multiple type
The CJ2 series supports Futurebus+ (IEC1301.1/ IEEE.P896.2) high-density multi pole packaging. The connectors of this series can mount up to six coaxial contacts on a housing the size of our MJ01 series IEC61076-4-104 compliant 24 pin connectors.
Hard Metric vertical back panel to board application. Easy to operate: several coaxial contacts can be simultaneously connected and disconnected on the board.
  • Vertical board-to-board application with straight type (for back plane) and right angle type (for daughter card).
  • Smooth coupling with a coupling guide that corrects for a misalignment up to 1 to 1.5mm at the time of coupling.
  • Can mount one to six coaxial contacts (through-hole plugs with two, four and six coaxial contacts)
  • Applications: Base station for mobile communications, Carrier devices, Measuring instruments

In addition to independent cable application type, we also harness products which satisfy your specification are available.

General Specifications

Characteristic impedance50 ohm
Frequency rangeDC to 3 GHz
Dielectric withstanding voltage500 VACr.m.s. (1 minute)
Insulation resistance1000 megohm min. (500 VDC)
Contact resistancecenter contacts: 50 milliohm max.
outer contacts: 20 milliohm max.
Voltage Standing Wave Ratio (V.S.W.R.)1.3 max. (DC to 3 GHz)
Applicable cable0.8D-W, UT85

Product ListShow allCustomize

Status RoHS compliant REACH compliant Connector types Standard type callout Number of contacts Minimum contact centerline pitch (mm) Characteristic impedance (ohm) Frequency range (GHz) V.S.W.R. Locking feature Applicable cable type (equivalent) Direction of cabling Mounting direction Mounting method Plug/ Jack Cable termination method (Center conductor) Cable termination method (Outer conductor) Contact rated current (A) Dielectric withstanding voltage (VACr.m.s. 1minute) Insulation resistance (megohm min.) Center contact resistance (milliohm max.) Outer contact resistance (milliohm max.) Accessory type Applicable product part numbers Applicable accessory Hermetic seal Applicable housing Applicable contacts Mate to contact Connection style Cable length (mm) Remarks
Active Yes CONTACT Not listed 50 DC to 3 1.3 0.085 inch Semi-flexible Straight Jack CMJ2-6S CJ2 series plug
Active Yes CONTACT Not listed 50 DC to 3 1.3 0.8D-2W Straight Jack CMJ2-6S CJ2 series plug
Active Yes PCB/MOUNT SIDE CONNECTOR Not listed 2 50 DC to 3 1.3 Push-on - - Right angle Through-hole solder Plug - - 500 1000 50 20 FALSE - - PC board thickness:1.6mm
Active Yes PCB/MOUNT SIDE CONNECTOR Not listed 4 50 DC to 3 1.3 Push-on - - Right angle Through-hole solder Plug - - 500 1000 50 20 FALSE - - PC board thickness:1.6mm
Active Yes PCB/MOUNT SIDE CONNECTOR Not listed 6 50 DC to 3 1.3 Push-on - - Right angle Through-hole solder Plug - - 500 1000 50 20 FALSE - - PC board thickness:1.6mm
Active Yes Housing Not listed 6 4 50 DC to 3 1.3 Friction Straight Straight PCB mount Jack 500 1000 FALSE - PC board thickness:2.4mm min.

Notice


Status RoHS compliant REACH compliant
Connector types Standard type callout Number of contacts
Minimum contact centerline pitch (mm) Characteristic impedance (ohm) Frequency range (GHz)
V.S.W.R. Locking feature Applicable cable type (equivalent)
Direction of cabling Mounting direction Mounting method
Plug/ Jack Cable termination method (Center conductor) Cable termination method (Outer conductor)
Contact rated current (A) Dielectric withstanding voltage (VACr.m.s. 1minute) Insulation resistance (megohm min.)
Center contact resistance (milliohm max.) Outer contact resistance (milliohm max.) Accessory type
Applicable product part numbers Applicable accessory Hermetic seal
Applicable housing Applicable contacts Mate to contact
Connection style Cable length (mm) Remarks