Although large servomotors are equipped with connectors, conventional small servomotors are connected to motors using wires. Due to wire length change during manufacturing to suit user’s desire, manufacturing servomotors has been inefficient.
Compactness of JN5 series allows direct connection between motors, and manufacturing motors is possible without paying attention to cable length, consequently increasing productivity.
|Number of positions||6 (power: 4 + brake: 2)|
|Current rating||7 A max./ contact|
|Rated voltage||250 VACr.m.s. (pollution level: 2, overvoltage category: II)|
|Dielectric withstanding voltage||2500 VACr.m.s.|
|Insulation resistance||1000 megohm min. (at 500 VDC)|
|Waterproof||IP67 (for connector mated)|
|Operating temperature range||-40 deg. C to +110 deg. C|
|Specification of wire connection||receptacle: straight through-hole|
plug: crimp (#22 to #18 AWG)
|Plug-applicable cable||outside cable diameter 6.5 to 7.5 mm|