JN6 Series

NEED ASSISTANCE?

Small waterproof connector

Outline
 TJN6 has been developed for small servo motors following the JN4, JN5 series.
With 4 power contacts, 2 brake contacts and 7 encoder contacts that are all reversible in the 180 degree direction.

Features
- All plastic - - - lightweight, low cost.
- Compact and low profile - - - 4pos.: plug overall length: 28mm, plug height: 11.4mm
- Receptacle attachment.
   4pos.: molded in to motor.
- 2pos. 7pos.: crimp attached to motor.
- Connection method.
   4pos. receptacle: board through-hole type.
   4pos. plug and other 2pos. 7pos.: crimp type.
- Secure mating - - - enable secure mating by screw fixing 4 points.
- Waterproof - - - IP67 class.
- Cable pulling out direction - - - selectable from two direction (180degrees)

General Specifications

Number of positions4 positions for power,
2 positions for brake
7 positions for encoder
Current rating4 pos. 7 A max./ contact
2 pos., 7 pos.: 1 A max./ contact
Rated voltage4 pos.: 200 VACr.m.s.
2 pos., 7 pos.: 100 VACr.m.s.
Dielectric withstanding voltage4 pos.: 1500 VACr.m.s.
2 pos., 7 pos.: 500 VACr.m.s.
Insulation resistance1000 megohm min. (at 500 VDC)
WaterproofIP67 (when mated)
Operating temperature range-40 deg. C to +125 deg. C
Specification of wire connection4 pos. receptacle: angle through-hole
4 pos. plug: crimp (#20 to #18 AWG)
2 pos., 7 pos.: crimp (#28 to #22 AWG)
Plug-applicable cable4 pos.: outside cable diameter 6 ± 0.5 mm
2 pos., 7 pos.: outside cable diameter 5 ± 0.5 mm

Product ListShow allCustomize

Status RoHS compliant REACH compliant Class Connector types Number of positions Shell size Termination styles Contact size Applicable cable: Outside cable diameter (mm) Applicable wire (AWG No.) Finish of contact in contact area Rated current (A) Dielectric withstanding voltage (VACr.m.s. 1minute) Insulation resistance (megohm min. (DC500V)) Contact resistance (milliohm max.) Waterproof Operating temperature range (deg. C) Applicable contacts Contact strip or loose piece Applicable housing Alternative insert position (deg.) Outer shell color Tool type Accessory type Applicable product part numbers Remarks
Active Yes CONTACT Pin contact Crimp #24 0.8 to 1.2 #24 to #22 Gold plating 7 1500 -40 to +125 - Strip JN6CR02PM1,JN6CR07PM1
Active Yes CONTACT Pin contact Crimp #24 0.7 to 1.2 #28 to #26 Gold plating 7 1500 -40 to +125 - Strip JN6CR02PM1,JN6CR07PM1
Active Yes HOUSING ASSEMBLY Receptacle (square flange) 4 S Angle through hole pin #18 - - Gold plating 7 1500 1000 IP67(when mated) -40 to +125 - - - for power
Active Yes HOUSING Receptacle (without flange) 2 R Crimp pin #24 1.0 to 1.2 #28 to #26, #24 to #22 1 500 1000 IP67(when mated) -40 to +125 JN6-24P-C2-10000,JN6-24P-C1-10000 - - for brake
Active Yes HOUSING Receptacle (without flange) 7 R Crimp pin #24 0.7 to 1.0 (#28 to #26), 0.8 to 1.0 (#24 to #22) #28 to #26, #24 to #22 1 500 1000 IP67(when mated) -40 to +125 JN6-24P-C2-10000,JN6-24P-C1-10000 - - for encoder
Active Yes HOUSING Angle plug 2 R Crimp socket #24 0.7 to 1.2 (#28 to #26), 0.8 to 1.3 (#24 to #22) #28 to #26, #24 to #22 1 500 1000 IP67(when mated) -40 to +125 LY10-C2-A1-10000,LY10-C1-A1-10000 - - for brake
Active Yes HOUSING Angle plug 7 R Crimp socket #24 0.7 to 1.2 (#28 to #26), 0.8 to 1.3 (#24 to #22) #28 to #26, #24 to #22 1 500 1000 IP67(when mated) -40 to +125 LY10-C2-A1-10000,LY10-C1-A1-10000 - - for encoder
Active Yes HOUSING Angle plug 4 S Crimp socket #18 1.3 to 1.8 #20 to #18 7 1500 1000 IP67(when mated) -40 to +125 ST-JN5-S-C1B-100-(A534G),ST-JN5-S-C1B-2500-(A534G) - - for power, Standard type
Active Yes HOUSING Angle plug 4 S Crimp socket #18 1.3 to 1.8 #20 to #18 7 1500 1000 IP67(when mated) -40 to +125 ST-JN5-S-C1B-100-(A534G),ST-JN5-S-C1B-2500-(A534G) - - for power, Reverse type

Notice


Status RoHS compliant REACH compliant
Class Connector types Number of positions
Shell size Termination styles Contact size
Applicable cable: Outside cable diameter (mm) Applicable wire (AWG No.) Finish of contact in contact area
Rated current (A) Dielectric withstanding voltage (VACr.m.s. 1minute) Insulation resistance (megohm min. (DC500V))
Contact resistance (milliohm max.) Waterproof Operating temperature range (deg. C)
Applicable contacts Contact strip or loose piece Applicable housing
Alternative insert position (deg.) Outer shell color Tool type
Accessory type Applicable product part numbers Remarks