KD10/KD20 Series

NEED ASSISTANCE?

Frequency range to 300MHz, simplified coaxial, multiple type
KD10/KD20 series are different from conventional single position independent coaxial connectors.
The multiple simplified coaxial connectors of these series have several positions in a single housing. All cables can be mated or unmated en masse on the board. Easy to operate.
Applicable to a middle/ low band high frequency from DC-300MHz. Characteristic impedance: 50 or 75ohms.
  • Number of positions: 1, 3, 5, 8
  • Push-on feature easy to mate and unmate.
    Simple locking mechanism with polarizing key.
  • Low profile: 6.1mm high on board
  • Receptacle with kinked hold-downs.
    It facilitates temporary insertion/ fitting for soldering.
  • The central contact of KD20 types are plated with thick gold of 0.3micrometer or more. A higher degree of reliability with two electric contact points.
    Plug with heat resistant cable.
  • Applications:
    50ohms type: Digital information equipment, Communications equipment, Measuring instruments, Factory automation equipment
    75ohms type: Image equipment, Broadcasting equipment, Multimedia equipment

For the cable application type, harnessed connectors which satisfy your specification are supplied.
We can also provide connectors and cables other than those listed in this catalog. For detail, please consult us.

General Specifications

Characteristic impedance50 ohm and 75 ohm
Frequency rangeDC to 300 MHz
Dielectric withstanding voltage250 VACr.m.s. (1 minute)
Insulation resistance100 megohm min. (250 VDC)
Contact resistancecenter contacts: 80 milliohm max.,
outer contacts: 30 milliohm max.
Voltage Standing Wave Ratio (V.S.W.R.)1.3 max. (DC to 300 MHz)
Applicable cable50 ohm: 0.8D-IEV
              for KD20/ CO-6F-SB-CX50
75 ohm: 0.8CV-E41447
Frequency range to 300MHz, simplified coaxial, multiple type

Technical Resources

Product ListShow allCustomize

Status RoHS compliant REACH compliant Connector types Standard type callout Number of contacts Minimum contact centerline pitch (mm) Characteristic impedance (ohm) Frequency range (MHz) V.S.W.R. Locking feature Applicable cable type (equivalent) Direction of cabling Mounting direction Mounting method Plug/ Jack Cable termination method (Center conductor) Cable termination method (Outer conductor) Contact rated current (A) Dielectric withstanding voltage (VACr.m.s. 1minute) Insulation resistance (megohm min.) Center contact resistance (milliohm max.) Outer contact resistance (milliohm max.) Accessory type Applicable product part numbers Applicable accessory Hermetic seal Applicable housing Applicable contacts Mate to contact Connection style Cable length (mm) Remarks
Active Yes Cable assembly Not listed 8 50 DC to 300 1.3 0.8D-IEV Straight Plug with cable Both-end termination, Reverse 600 For the cable application type, harnessed connectors which satisfy your specification are supplied.
Active Yes PCB/Mount side connector Not listed 1 - 50/ 75 DC to 300 1.3 Push-on - - Right angle Through-hole solder Jack - - 250 100 80 30 FALSE - - One contacting point
Active Yes PCB/Mount side connector Not listed 3 50/ 75 DC to 300 1.3 Push-on - - Right angle Through-hole solder Jack - - 250 100 80 30 FALSE - - One contacting point
Active Yes PCB/Mount side connector Not listed 5 50/ 75 DC to 300 1.3 Push-on - - Right angle Through-hole solder Jack - - 250 100 80 30 FALSE - - One contacting point
Active Yes PCB/Mount side connector Not listed 8 50/ 75 DC to 300 1.3 Push-on - - Right angle Through-hole solder Jack - - 250 100 80 30 FALSE - - One contacting point
Active Yes PCB/Mount side connector Not listed 1 50 DC to 300 1.3 Push-on - - Right angle Through-hole solder Jack - - 250 100 80 30 FALSE - - Two contacting point
Active Yes PCB/Mount side connector Not listed 3 50 DC to 300 1.3 Push-on - - Right angle Through-hole solder Jack - - 250 100 80 30 FALSE - - Two contacting point
Active Yes PCB/Mount side connector Not listed 5 50 DC to 300 1.3 Push-on - - Right angle Through-hole solder Jack - - 250 100 80 30 FALSE - - Two contacting point
Active Yes PCB/Mount side connector Not listed 8 50 DC to 300 1.3 Push-on - - Right angle Through-hole solder Jack - - 250 100 80 30 FALSE - - Two contacting point

Notice


Status RoHS compliant REACH compliant
Connector types Standard type callout Number of contacts
Minimum contact centerline pitch (mm) Characteristic impedance (ohm) Frequency range (MHz)
V.S.W.R. Locking feature Applicable cable type (equivalent)
Direction of cabling Mounting direction Mounting method
Plug/ Jack Cable termination method (Center conductor) Cable termination method (Outer conductor)
Contact rated current (A) Dielectric withstanding voltage (VACr.m.s. 1minute) Insulation resistance (megohm min.)
Center contact resistance (milliohm max.) Outer contact resistance (milliohm max.) Accessory type
Applicable product part numbers Applicable accessory Hermetic seal
Applicable housing Applicable contacts Mate to contact
Connection style Cable length (mm) Remarks