PW01 Series

NEED ASSISTANCE?

High efficiency, high reliability power connector
  • Pin connector (pin header) is press fit type (finish diameter: 0.82 to 0.98), and the mounting pitch is 2.54mm.
  • For three contact connector, a wire relay connector is available.
  • Mold latch ensures complete mating and unmating.
  • Highly conductive copper alloy is used for contacts, and individual two-point contact system and gold plating ensure high contact reliability. (CA725 is used for press fit contacts.)
  • Applicable cables are one JIS-C-3316 5.5mm2 (equivalent to #10 AWG) or two JIS-C-3316 2.0mm2 (equivalent to #14 AWG) crimp. For relay pin contacts, AWG 12 to 16 are applicable.
  • Secondary hook mechanism to secure cable.

General Specifications

# of contacts2, 3
Current15 A
Dielectric withstanding voltage1000 VACr.m.s. (1 minute) (initial)
Insulation resistance100000 megohm min. (initial)
Contact resistance20 milliohm max. (initial)
Applicable wire5.5 mm2 * 1 or 2 mm2 * 2
Operating temperature range-10 deg. C to +65 deg. C
Compliant pin insertion force222.5 N
Compliant pin retention force44.1 N

Product ListShow allCustomize

Status RoHS compliant REACH compliant Connector types Number of contacts Connector styles Termination styles Mating side contact finish Color of insulator Minimum thickness of the plating contact area (micrometer) Remarks
Active Yes Socket housing 2 Crimp Green
Active Yes Socket housing 2 Crimp Yellow
Active Yes Pin connector 3 Straight Press-fit Gold plating over Nickel Green 0.76
Active Yes Pin connector 3 Straight Press-fit Gold plating over Nickel Yellow 0.1
Active Yes Pin connector 3 Straight Press-fit Gold plating over Nickel Yellow 0.76
Active Yes Pin housing 3 Crimp Yellow
Active Yes Socket housing 3 Crimp Yellow
Active Yes Socket contact Crimp Gold plating over Nickel 0.1 Finish of contact in terminal area:Tin plating over Nickel
Active Yes Socket contact Crimp Gold plating over Nickel 0.76 Finish of contact in terminal area:Tin plating over Nickel

Notice


Status RoHS compliant REACH compliant
Connector types Number of contacts Connector styles
Termination styles Mating side contact finish Color of insulator
Minimum thickness of the plating contact area (micrometer) Remarks