Request for Connectors manual
Connectors manual download - request transmission completed. The URL link will be sent (from jcs@jae.co.jp) to your chosen email address very soon. Please wait for the email to arrive in your inbox.
If you do not receive a email, it is most likely due to an error in the return email address you have provided above.
Or, usually the problem is a spam filter somewhere along the path and not a lack of response.
Terms of Use
When requesting, receiving, and/or downloading Connectors manual from JAE, you are agreeing to comply with and be bound by the following terms and conditions of use. The terms of use are subject to change at any time without notice.
- Connectors manual provided by JAE may be deleted or revised at any time without notice.
- Connectors manual provided by JAE is meant solely for the use of the original individual the data was requested by.
- Connectors manual provided by JAE is copyrighted by JAE and is not to be altered or shared with outside parties.
- Downloaded Connectors manual is to be used only for dimension confirmations and reference purposes only.
- You acknowledge that such information and materials may contain unintended inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
- Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
- This website contains material which is owned by or licensed to JAE. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
- Unauthorized use of JAE ’s Connectors manual may give rise to a claim for damages and/or be a criminal offence.
- The content of the pages and data provided on this website is for your general information and use only. It is subject to change without notice.
-
JAE does not share your contact information with any outside parties. Your provided contact information may be used for marketing and business operation purposes by JAE. However, you can request to not be included in marketing e-mails, phone calls, mails, etc. by Unsubscribe Form.
- Your provided contact information may be used for marketing and business operation purposes by JAE. However, you can request to not be included in marketing e-mails, phone calls, mails, etc. by Unsubscribe Form.
-
Personal information provided by you shall be used and handled at JAE in strict accordance with the following Privacy Policy:
PRIVACY POLICY
This is an important notice regarding your privacy and the way in which Japan Aviation Electronics Industry, Limited (referred to as “we”, “our”, “us” or “JAE” in this policy) collects and makes use of your personal data. We want to be open and transparent with you, and therefore encourage you to contact us if you have any questions about this policy or the ways in which we use your personal data.
We take our privacy responsibilities seriously and are committed to protecting and respecting your privacy.
This policy sets out the basis on which any personal data we collect from you, or that you provide to us, will be processed by us. Please read the following carefully to understand our views and practices regarding your personal data and how we will treat it.
For the purpose of applicable privacy legislation, the data controller is Japan Aviation Electronics Industry, Limited of 21-1, Dogenzaka 1-chome, Shibuya-ku, Tokyo 150-0043, Japan.
Questions regarding this policy should be directed to LD_Personal_Info_Contact@jae.co.jp . Any questions about the operation of this policy or any concerns that the policy has not been followed should be referred in the first instance to LD_Personal_Info_Contact@jae.co.jp .
-
1.What information do we hold about you?
We may collect, store and use personal data about you (referred to throughout this privacy policy as personal information):- personal information you provide to us via our website, for example, by using this “Request for Connectors manual” form.
- Any personal information you provide to us during your interactions with us.
- Information gathered by cookies used on our website. Our website uses cookies to distinguish you from other users of our website. This helps us to provide you with a good experience when you browse and also allows us to improve the way our website works. For detailed information on the cookies we use and the purposes for which we use them please refer to our Cookie Policy (https://www.jae.com/en/cookies-law/ ).
- Information provided to us by third party service providers we work with, for example, analytics providers.
-
2.How will we use your personal information and what is the legal ground we rely on for doing so?
We will only use your personal information when the law allows us to. When we use your personal information, we must have a legal ground for doing so. The following are (amongst others) the legal grounds by which we can use your personal information:
- Where you have provided us with your consent for us to do so;
- Where we need to perform the contract we have entered into with you or to take steps to enter into a contract with you;
- Where we need to comply with a legal obligation to which we are subject;
-
Where it is in pursuit of our legitimate interests (or those of a third party) and your interests and fundamental rights do not override those interests.
More specifically, we will use your personal information in the following circumstances:
- Your contact details to provide you with information on our products and services. This may include technical information and/or marketing information - in pursuit of our legitimate interests in keeping you informed about our products, services and business updates.
- Dealing with your enquiry made via this “Request for Connectors manual” forms on our website - in pursuit of our legitimate interest to ensure your enquiry is dealt with promptly and efficiently.
- Your contact details to facilitate business between your company and ours - in pursuit of our legitimate interest of daily business with your company.
- To administer our website and for internal operations, including troubleshooting, data analysis, testing, research, statistical and survey purposes - in pursuit of our legitimate interests (to better understand how people interact with our website and solve any issues it may have).
- To transfer to third party service providers - in pursuit of our legitimate interests (in outsourcing for effectiveness and efficiency).
- To contact you if we wish to use your information for a purpose not set out in this policy - to comply with a legal obligation.
- Your contact details to provide you with information on our products and services. This may include marketing information - where you are a consumer and have provided us with your consent for us to do so.
-
3.What happens if there is a change of purpose?
We will only use your personal information for the purposes for which we collected it, unless we reasonably consider that we need to use it for another reason and that reason is compatible with the original purpose. If we need to use your personal information for an unrelated purpose, we will notify you and we will explain the legal basis which allows us to do so.
-
4.Which type of third parties might we share your personal information with?
We require third parties to respect the security of your personal information and to treat it in accordance with the law. For example, where we instruct third party service providers, we carry out due diligence on those providers to ensure they treat your personal information as seriously as we do.
We may share your personal information with the following types of third parties:- Technical support providers, for example, assisting with our website.
- Professional advisers such as lawyers, accountants and business analysts.
- Providers which help us collate and organise information effectively and securely.
- Third party software hosting companies which provide us with software solutions.
- Providers which host our servers in their data centres in UK, USA and Taiwan.
- Cloud storage providers in order to back-up our data.
- Our subsidiaries in order to respond to your requirement effectively.
-
5. Data retention How long will we use your personal information for?
We will only retain your personal information for as long as necessary to fulfil the purposes we collected it for.
We assess the appropriate retention period for different information based on the size, volume, nature and sensitivity of that information, the potential risk of harm to you from unauthorised use or disclosure of that information, the purposes for which we are using that information, applicable legal requirements for holding that information, and whether we can achieve those purpose(s) through other means.
Business contacts- The period we keep your personal information depends on a number of circumstances. For example:
- Where we have collected your personal information during the course of your and our organisations doing business, we will keep your personal information for as long as this business continues, or for as long as we have a commercial interest in holding your personal information, for example, with a view to doing business in the future.
- Where you use our website and one of our cookies are activated, that cookie will operate for the duration set out in our Cookie Policy.
-
6. Where we store your personal data
Electronic versions of your personal information are stored on our servers in Japan. We may also transfer personal data to our servers in UK, USA and Taiwan. We have put in place appropriate safeguards between our Japan and UK entities to provide for the lawful transfer of personal data outside of the European Economic Area.
Where we use third party service providers to assist us, your personal information may also be stored in accordance with their practices and procedures. We require third parties to respect your personal information and to treat it in accordance with the law.
-
7. Rights of access, correction, erasure, restriction, and transfer Your rights in connection with your personal information
Under certain circumstances, by law you have the right to:If you want to review, verify, correct or request erasure of your personal information, object to the processing of your personal data, or request that we transfer a copy of your personal information to another party, please contact LD_Personal_Info_Contact@jae.co.jp .- Request access to your personal information (known as a “data subject access request”). This enables you to receive a copy of the personal information we hold about you and to check that we are lawfully processing it.
- Request correction of the personal information that we hold about you. This enables you to have any incomplete or inaccurate information we hold about you corrected.
- Request the erasure of your personal information. This enables you to ask us to delete or remove personal information when there is no good reason for us continuing to process it. You also have the right to ask us to stop processing personal information where we are relying on a legitimate interest and there is something about your particular situation which makes you want to object to processing on this ground.
- Request the restriction of processing of your personal information. This enables you to ask us to suspend the processing of personal information about you, for example if you want us to establish its accuracy or the reason for processing it.
- Request the transfer of your personal information to another party.
-
8. No fee usually required
You will not have to pay a fee to access your personal information (or to exercise any of the other rights). However, we may charge a reasonable fee if your request for access is clearly unfounded or excessive. Alternatively, we may refuse to comply with the request in such circumstances.
-
9. What we may need from you
We may need to request specific information from you to help us confirm your identity and ensure your right to access any personal information (or to exercise any of your other rights). This is a security measure to ensure that personal information is not disclosed to another person who has no right to receive it.
-
10. Right to withdraw consent
In the limited circumstances where you may have provided your consent to the collection, processing and transfer of your personal information for a specific purpose, you have the right to withdraw your consent for that specific processing at any time. To withdraw your consent, please contact LD_Personal_Info_Contact@jae.co.jp .
Where we are providing you with marketing information, you can also change your marketing preferences by using the unsubscribe button at the bottom of our marketing e-mails sent to you.
Once we have received notification that you have withdrawn your consent, we will no longer process your personal information for the purpose or purposes you originally agreed to, unless we have another legitimate basis for doing so.
-
11. What happens if you fail to provide personal information?
If you fail to provide certain information when requested, we may not be able to perform the contract we have entered into with you (such as providing you with our products or services), or we may be prevented from complying with our legal obligations (such as to ensure the health and safety of visitors to our premises).
-
12. Right to complain
You have the right to make a complaint if you wish to do so. The organisation with oversight of our processing is the Information Commissioner’s Office, which can be contacted in writing at Information Commissioner’s Office, Wycliffe House, Water Lane, Wilmslow, Cheshire, SK9 5AF, by telephone (0303 123 1113) or by e-mail (casework@ico.org.uk ).
-
13. Changes to this privacy notice
We may change, modify, add or remove portions of this policy at any time, and any changes will become effective immediately.
Any changes we make to our privacy policy will be posted on this page and, where appropriate, notified to you.
-
1.What information do we hold about you?
基础设施(通信系统)
系列比较
FO-BD7 Series (Outdoor Environmentally Resistant Optical Connector with Thermal Management Design)
Outdoor Environmentally Resistant Optical Connector with Thermal Management Design
特征
Thermal countermeasure by installing an optical module within the plug connector
Seamless optical module replacement process
IP67 rated water / dust ingress protection
Environmental resistance ideal for outdoor applications
65 GHz Compatible SMPM Coaxial Connector
特征
MIL-STD-348A compliant, ultra compact coaxial connector.
Compatible with the high-frequency band up to 65GHz.
Floating connection between boards is made possible by 3-part mating configuration, consisting of a pair of plug receptacles and jack adapters.
Push-on lock method for easy mating and unmating.
RP04 Series (Hybrid AOC for High-speed Transmission & Power supply)
Hybrid AOC (Active Optical Cable) for High-speed Transmission and Power supply
特征
JAE proprietary connector for high-speed transmission which enables a standard-agnostic interface.
Realizes high-speed transmission (Optical)+low-speed signal (Copper)+Power Supply using one hybrid cable.
Compact receptacle connector saves board mounting space.
Friction or mechanical lock type plug, which mates with the same receptacle connector, are available.
JN1/JN2 Series (Small Circular Connector)
Small Circular Connector
特征
An all plastic lightweight connector
Easy and secure mating with push-and-twist type one-touch locking mechanism
Terminal specifications for receptacle and plug differ by series and number of contacts, please refer to general specifications for each product. Socket contact for 10 position plug is available in both crimp and solder terminations
The 4-contact receptacle does not incorporate grounding in its shell. Properly grounding the shell will be required in implementing the connector
Crimp terminated relay receptacle is available in cable-connecting and wall-mount receptacle types (both 4 and 10 positions)
Plugs available in straight and angled back shell types and individual coupler only type (10 position only). The cable direction of the angle plug can be set in four orientations by rotating the plug in 90 degree increments
Mating height of angle plug is 30.8mm from panel surface (both 4 and 10 positions)
IP67 rated waterproof and dustproof
Superb environment-proof performance with vibration and oil resistance
Suitable for conduit mounting (except for individual coupler type plug)
Mating compatibility to JN1, with considerably reinforced with metal material in part of the outer shell (strength increased threefold over JN1)
Uses same crimp contact as the JN1
Terminal specification for receptacle and plug differs by series and number of contacts, please refer to general specification for each product. 4-contact receptacle body is grounded
4-contact type is TÜV certified
Plug is available in straight and angle types. The cable direction of the angle plug can be set in four orientations by rotating the plug in 90 degree increments
Contact variations: 4, 10 pos.
Angle plug mating height is 31.3mm from cabinet surface (both 4 and 10 positions)
IP67 rated waterproof and dustproof
Superb environment-proof performance with vibration and oil resistance
JL10 Series (One-touch/ Screw Compatible Waterproof Connector)
One-touch/ Screw Mating Compatible Circular Waterproof Connector
特征
Utilizes a one-touch bayonet lock style mating to allow secure mating even in narrow operating spaces or areas with poor visibility.
JL10 Receptacle is an one-touch / screw mating hybrid type.
Receptacle's cable connection is available as soldering termination (for all receptacle) and crimp termination (for pin arrangements18-10, 22-22 and 32-17)
With guide mark (color: White) on JL10 Series receptacle and plug, mating assurance can be confirmed by sight.
Low-profile compact design, and direction of the cable leader of angled type can be set in arbitrary 8 orientation in 45 degrees increments.
Same cable clamp as used for JL04V Series.
UL recognized and TÜV approved product.
IP67 waterproof and dustproof
Superior environmental performance against vibration and oil.
DW11 Series（Floating Board to board Power Connector）
Floating Board to board Power Connector
特征
Mechanism incorporating unique floating structure
Floating tolerance of 0.8mm in X and Y directions
High power compatibility up to 20A and 250V
The number of terminal pins can be adjusted according to customer requirements
JL04V Series (TÜV, Circular Connector)
TÜV, Waterproof, Solder type
特征
Approved by TÜV Rheinland
Sequential connection ensures reliable link with protection circuit.
Waterproof (mated condition) structure
Waterproof independent receptacle available
3 type plugs
Polarization
Pin insert/ Socket insert
Alternative insert positions
KN01 Series (High-density, Waterproof Rectangular Connector)
High-density, Waterproof Rectangular Connector
特征
Rack and pinion system lever structure allows for little operating force for engagement.
The lever is stationary before mating and the dual lock structure prevents incomplete mating and incorrect operation.
Multiple configuration of insulator blocks and insertion orientation allows for various pin counts and cabling arrangements.
An optional insulator block with EMI noise controlshielding allows the combination of power and signal in a single unit.
Aluminum outer shell provides the connector to be lightweight and allows high-density cabling.
Superior cable retention through a thread-fastening saddle clamp.
D-Sub Series (Compact, Rectangular Connector)
Compact, Rectangular Connector
特征
Supports various connections
Anti-reverse insertion structure
5 types of shell sizes
Combination of pin type and socket type
Various accessories
JB12 Series (M12, Compact Waterproof Ethernet Connectors)
M12, Compact Waterproof Ethernet Connectors
特征
Compact, waterproof jam nut type in-line connector
Allows for highly-reliable shielded connections, as well as flexible connection of shielded wires of various thicknesses
An expanded crimp termination range, AWG #22 to #30
X-code plug in straight and angle variation
DF02 Series (1.27mm Pitch, Interface Connector)
Half-Pitch (1.27mm）Interface Connector
特征
Receptacle:
The receptacle is equipped with both lock spring (one-touch lock) and screw lock (screw fastening) to allow mating with either hood-type plug.
The terminals being covered prevents short circuit causing foreign object ingress.
The hook-pin integrated as part of the shell strengthens the PCB hold-down.
Plug:
The resin-plastic hood allows the small form-factor plug to be light-weight and cost effective.
EMI countermeasure hood, with it’s latch lock method two-unit structure, allows for excellent workability and superior reparability.
IDC termination available (28AWG to 30AWG) allowing for labor efficiency.
Screw fixed harnessing structure allows for operation-time saving.
JN1V/JN2V Series (Waterproof Circular Connector)
Small Circular One-touch Locking Waterproof Connector With Enhanced Vibration Resistance
特征
Superior contact reliability achieved with a multi-contact structured socket contact with high vibration resistance.
Compliant with 245 m/s2 (25G) vibration condition
Designed to mate with standard JN1/JN2 receptacle connectors
Utilizes same semi-automatic crimping tool (applicator) as JN1/JN2 contacts
One-touch, push-and-twist, lock mechanism
IP67 rated dust and waterproof (when mated)
The right angle plug can be set in four different 90 degree increment cable orientations
JN1V is an all-plastic type, and JN2V is an robust type partially using metal parts
N/MS Series (Circular Connector Compatible to MS Standard)
Circular Connector Compatible to MS Standard
特征
MIL-DTL-5015 compliant and MS-connector compatible
Standard circular connector with a wide variety of types, sizes and insert options
Screw-driven mating/disengagement allows for easy operation with minimal force
Selectable insulator to fit pin and socket insert in either plug or receptacle
Polarization
Alternative insert positions
MA01 Series (Automotive Grade, High-speed Transmission, Floating Board-to-board Connector)
Automotive Grade, High-speed Transmission, Floating Board-to-board Connector
特征
Floating tolerance: ±0.5 mm in both X & Y directions
Stacking height tolerance between boards: ±0.5 mm in Z-axis direction
Two-point contact structure ensures high contact reliability
Low insertion and removal forces achieved by roll surface contact structure
Operating temperature range: -40℃ to +125℃
8 Gbps+ high-speed transmission (10GBASE-KR and PCIe Gen3 equivalent)
Excellent mating process with large guides, supporting automatic assembly and mating
Supports automatic mounting
Keyed to prevent mis-mating
Allows for multiple connectors to be used on a single board
MA01 Series (8Gbps+ Floating Board to Board Connector with Expanded X/Y Floating Tolerance of 0.8mm)
8Gbps+ Floating Board to Board Connector with Expanded X/Y Floating Tolerance of 0.8mm
特征
Floating tolerance: 0.8 mm in both X & Y directions
Stacking height tolerance between boards: 0.5 mm in Z direction
Two point contact structure ensures high contact reliability
Low insertion and removal forces achieved by using rolled surfaces of contacts
Operating temperature range: - 40 deg. C to +125 deg. C
8 Gbps + high speed transmission (10 GBASE KR and PCIe Gen3 equivalent)
Excellent mating process with large guides, supporting automatic assembly (mating guide length: 1.0 mm)
Supports automatic mounting
Multiple connectors can be used to interface between the same pair of PCB’s
Keyed to prevent reverse insertion
MX34 Series (High-density Non-waterproof Automotive Connector)
Compact/ High-density Non-waterproof Automotive Connectors
特征
Satisfies connector specifications required by automotive manufacturers.
Expanded variations.
Socket housing is available in color variations for color coding the connectors so that they can be distinguished at mating.
Mechanical lock system ensures reliable mating.
ISO/JASO standard middle tab size 0.64mm is used for pin terminals.
Socket terminal is a box structure type durable to external strength.
MX84B Series (PHEV/EV Connector Using Low Flammability Material)
PHEV/EV Connector Using Low Flammability Material
特征
Compatible with Vehicle-mounted specifications.
Insulator materials compliant with the flammability standard UL94 V-0
Comes in the same form factor and dimensions as the MX34 Series
Terminal size: 0.64 mm (pin terminal width)
DX07 Series USB Type-C® Connector (Receptacle)
USB Type-C<sup>®</sup> Connector (Receptacle)
特征
Supports 240W (5A/48V) maximum power supply
Reversible plug orientation makes possible to insert both ways up
Lock structure with superior durability
Large selection of connector variations are available in DX07 Series
SMT Contact Right Angle Receptacle
Waterproof Receptacle
Hybrid Contact Receptacle
Vertical Receptacle
16-position Right Angle Receptacle
USB4® Right Angle Receptacle
DX07 Series USB Type-C Connector (Plug)
USB Type-C Connector (Plug)
特征
Compatible with Universal Serial Bus Type-C Specification Release 2.3
Compatible with 10Gbps SuperSpeed Plus communication. (USB 3.2 Gen 2)
Compatible with USB Power Delivery Extended Power Range (240W (5A/48V) maximum)
Symmetric interface which allows for the plug to be inserted upside down or right side up
Superior EMI/ EMC characteristics.
Designed for high mechanical strength.
Superior lock structure with high durability and clear click feeling during mating.
Easy to insert with a smooth “R” on the tip of the mating area of the metal outer shell.
Vertical Plug is available.
Surface mount type, 24-position plug with consideration for docking setup
Compatible with USB 80Gbps communication. (USB4)
Adopted as the official test fixture golden plug used for USB4 receptacle certification testing.
Deep drawn shell leads to approximately 2mm reduction in depth which allows for miniaturization of the plug hood and improved cable designs
Compatible with USB4 GEN3 PLUG CONNECTOR HIGH SPEED DESIGN GUIDE
DX07 Series Harness USB Type-C Cable Assembly
USB Type-C Connector (Cable Harness)
特征
Compatible with Universal Serial Bus Type-C Specification Release 2.0
Compatible with USB Power Delivery 3.0
Compatible with SuperSpeed USB 10Gbps communication (USB 3.2 Gen2)
Supports 100W (5A/20V) maximum power supply.
Reversible plug structure with no need to worry about the plug orientation.
Superior EMI/ EMC characteristics.
Lock structure with superior durability.
Realizes downsizing of hood.
Available with a screw lock for securely fixing to the device housing.
Frequency Range to 3 GHz, Threaded Coupling (M29*1.5)
特征
Rugged and environmentally immune.
Compatible with a wide variety of high power and low cost cables of large diameters.
A high degree of reliability provides stable electric continuity and high frequency performance.
AC01 Series (0.5 mm Pitch, Stacking Type Connector)
0.5 mm Pitch, Stacking Type Board-to-Board Connector
特征
Contact pitch: 0.5mm stacking height: 2.5mm and 3.0mm
Highly stable and reliable contact structure, proven over decades of use.
Embossed tape packaging for convenience for SMT production.
AC02 Series (0.5 mm Pitch, Stacking Type Connector)
2.5mm/3.0mm Stacking Heights, 0.5 mm Pitch Board-to-Board Connector
特征
0.5 mm pitch, large pin count board to board connectors
Stacking height 2.5 mm and 3.0 mm
Coaxial Connectors Adapters
特征
Adapters
Cleanable Adapters (Optical Connector)
Cleanable Adapter
特征
Cleanable adapter
IEC60169-29(Type 1.0/ 2.3) Standard Compatible Coaxial Connector
特征
Compact coaxial connector compatible to IEC 60169-29 (Type 1.0/ 2.3) standard.
Receptacle side angle type suitable for narrow-pitch multiple mounting because of small size -- 7mm * 7mm for occupied PCB dimension and 4.1 mm dia. outer dimension at mating portion.
Low profile receptacle, 7.2 mm height from PCB.
Screw lock mating is possible and the size is equivalent to Type SMB (IEC 69169-10)
Floating in axial direction with approximately 3 mm mating stroke (effective length)
Three types of lock mechanism is standardized for cable side, which are intermatable with this receptacle.
50 ohm and 75 ohm are standardized. Applicable frequency are as below.
High environmental durability with surface finishes in gold plating.
Frequency Range to 6 GHz, Plug-in Coupling
特征
Rack and panel plug-in coaxial connectors.
Floating mechanism offsets location error when mated up to ±1mm in the mating direction and ±0.5mm in the radial direction.
Allowable inclination angle when mating Horizontal: 1.5degrees Vertical: 1.5degrees
A high degree of reliability provides stable electric continuity and high frequency performance.
Frequency Range to 3 GHz, High Density Multiple Type
特征
Easy to operate: several coaxial contacts can be simultaneously connected and disconnected on the board.
Vertical board-to-board application with straight type (for back plane) and right angle type (for daughter card)
Contacts conforming to DIN41626 standard.
No. of contacts: 3, 6
Optional housings for daughter card with anchor pins and hexagonal nuts, providing a stronger bond to the board.
Frequency Range to 3 GHz, Coaxial Contacts for Dsub Connectors
特征
These units are high performance models with an applicable frequency range from DC-3GHz and with a V.S.W.R.(Voltage Standing Wave Ratio) of 1.2 or lower.
An original design based on our excellent high frequency technology provides outstanding reliability and performance.
Frequency Range to 3 GHz, Push-on Coupling
特征
Applicable frequencies: from DC up to 3GHz. High performance with a V.S.W.R.(Voltage Standing Wave Ratio) of 1.2 or less.
Push-on coupling, compact and lightweight.
Crimp cable termination with limited variation in high frequency.
Low profile 9.5mm high when mated.
A high degree of reliability provides stable electric continuity and high frequency performance.
Board-to-Board Floating Coaxial Connector
特征
Board-to-Board floating coaxial connector
Cable-less connection (minimum board clearance: 6mm achieves high-density and space-saving board-to-board connection.
Floating structure enables easy multiple board-to-board connections by allowing misalignment of up 0.34mm (5 degrees) in the horizontal direction and up to 0.4mm axially.
Applicable DC frequency band up to 5GHz, and maintains an excellent connection characteristic even under misaligned connections.
SMA Coaxial connector (End-Launch type)
Compatible 20 GHz/ IEC60169-15 Standards, Coaxial Connector
特征
Compatible to high-frequency band up to 20GHz, when mounted on board.
High frequency characteristic, insertion loss without drop and low reflection.
Easy mounting and repair made possible by screw fixing outer conductor of connector to board without soldering.
Compatible to all board thickness.
Connection configuration for easy soldering of signal contacts.
Compatible to high density mounting with maximum breadth 11mm.
FO-BC Series (Outdoor Waterproof Optical Connector)
Outdoor Waterproof Optical Connector with LC Connector
特征
High robustness with metallic outer shell.
LC adapter incorporated into receptacle
(Connection for LC plug on both device internal side and plug mating side)
Double lock of LC connector and outer shell ensures highly reliable connection
Can accommodate a cable retention wire.
We supply this product with harnesses processing to meet the customer's specifications.
Please contact us for further information.
FO-BD2 Series (SFP Direct Connection Waterproof Connector)
Waterproof I/O Connector to Make Direct Connection with SFP
特征
Possible to connect directly to on-board SFP transceivers, modular jacks and others.
Highly flexible and compatible connections with various types of SFP transceivers, modular jacks and others.
Assembly of Plug Harnesses can be completed on site as plug can be builtin to existing harnesses.
Dual lock plug method prevents excessive load on the connections of the inner connector during operation.
Possible to replace connector as the panel attachment is compatible with TE manufactured FullAXS.
Environmental resistance performance ideal for outdoor applications.
FO-BD6 Series (SFP Direct Connection Waterproof Connector)
SFP Direct Connection Waterproof I/O
特征
Single-action connection achieved with a three-axis floating structure.
IP67 dustproof and waterproof, ideal for outdoor use with excellent environmental resistance performance.
Compact and lightweight with plastic connector body.
Space-saving compact design, including applicable cable length.
FO-BH Series (Outdoor Waterproof Optical Connector)
Compact Outdoor Use Waterproof Optical Connectors
特征
High robustness with metallic outer shell.
Receptacle device internal side: connection for LC plug.
Plug mating side: connection for LC plug also possible using LC conversion adapter (not waterproof)
Can accommodate a cable retention wire.
We supply this product with harnesses processing to meet the customer´s specifications.
Please contact us for further information.
FO-FC Series Optical Connector
Simplex Fiber, Type FC/ Conformed to IEC61754-13(JIS C 5970)
特征
Type FC
Conformed to IEC61754-13 (JIS C 5970・F01 type)
Threaded coupling.
For single mode and multimode
FO-LC Series Optical Connector
Simplex/ Duplex Fiber, Type LC/ Conformed to IEC61754-20 (JIS C 5964-20)
特征
Type LC
Conformed to IEC61754-20(JIS C 5964-20)
Lever lock type
For single mode and multimode
FO-SC Series Optical Connector
Type SC/ Conformed to IEC61754-4 (JIS C 5973)
特征
Type SC
Conformed to IEC 61574-4(JIS C 5973・F04 type)
One hand push-pull lock.
For Single mode and multimode
FR02 Series (0.2 mm Pitch, FPC Connector)
0.2 mm Pitch, 0.82 mm Mated Height FPC Connector
特征
Space saving FPC connector with 0.2 mm pitch, 0.82 mm mated height, 3 mm depth.
Applicable FPC thickness 0.2 mm +/- 0.03㎜ Top and bottom-surface connection type, LIF (Low Insertion Force) structure, Rear-flip type.
LIF structure temporarily holes FPC in place.
Tapered guides in the insertion area for improved FPC insertion guidance
Easy actuator operation.
Area under connector, except terminal area, can be used for trace patterns
With a structure that prevents the actuator from coming off and good operational feeling is provided during operation.
Lead-free, halogen-free compliant.
Nickel barrier is included as a solder diffusion countermeasure.
HB03 Series (Compact Cable In-line Connector)
Compact Cable In-line Connector
特征
Non-waterproof, compact in-line connector
Secure one-touch locking with tactile click
Streamline connector with low-profile locking tab.
Compact housing that can be threaded through tight spaces inside devices
Crimp type connection allows for easy and secure termination, compatible with a wide range of wire sizes (AWG#30 to #22)
UL recognized product: File No.E67741
IL-G Series (2.5 mm Pitch, Board-to-Cable Connector)
2.5 mm Pitch, Single Row, Crimp, Board-to-Cable Connector
特征
Crimp type cable-side easy to terminate.
Mismating-prevention structure
Friction locking mechanism.
IL Series (2.5mm Pitch, Board-to-Cable Connector)
2.5mm Pitch, Single Row, Crimp, Board-to-Cable Connector
特征
Box type pin header.
Crimp type cable-side easy to terminate.
Highly reliable socket contacts.
Friction locking mechanism.
IL-WX Series (0.8 mm Pitch, Board-to-Board Connector)
0.8 mm Pitch, SMT, Board-to-Board Connector, Parallel/ Vertical
特征
0.8mm pitch, SMT, parallel/ vertical
Low profile, connection between parallel boards spaced 4.5mm.
Combinations of socket receptacle (straight) and pin header (straight/ right angle) enable vertical and parallel connections.
The boss on both sides of connector bottom ensure correct positioning on board. The right angle pin header is designed with metallic hold-downs on both sides, preventing floating-up during automatic packaging and improves retention on board.
Configuration suited for automatic packaging.
Sufficient adsorbing face.
Terminal length easy to be recognized by image.
IL-Y Series (1.5mm Pitch, Board-to-Cable Connector)
1.5mm Pitch, Sngle Row, Crimp, Board-to-Cable Connector
特征
Box type pin header.
Crimp type cable-side easy to terminate.
Highly reliable socket contacts.
Friction locking mechanism.
Design prevents flux wicking.
JA Series (Crimp Type, General Purpose, Circular Connector)
Crimp Type, General Purpose, Circular Connectors
特征
Crimp type, general purpose, circular connectors
JA*A Series (General Purpose Plug, Waterproof Circular Connector)
General Purpose Plug, Waterproof (mated), Panel-to-Cable/ Cable-connecting, Solder Type
特征
General purpose plug
Intermatable with JL04V series
Without earth terminal
Waterproof(mated condition) structure
Once mated, intrusion of water and dust from outside is prevented
Waterproof: 24hours or more at a depth of 1 m
Alternative insert position
To prevent mis-mating to connector, there are insert rotating positions available
Polarization
Features on mating components to prevent incorrect mating
JB1 Series (Small, Rugged, Waterproof, Circular Connector)
Small, rugged, waterproof(mated condition)
特征
Miniature, rugged
Waterproof (mated condition) structure
Jam nut type receptacle. Easy mounting on panel.
EMI protection
Polarization
JB10 Series (All-plastic, One-touch Lock, Waterproof Connector )
All-plastic Circular One-touch Lock and Waterproof Connector
特征
One-touch, push-and-twist, locking mechanism for easy handling and superior vibration resistance.
Plastic shell, light-weight and low-cost connector
IP67 rated waterproof performance in mated condition.
Integrated EMI shielding structure.
Tool-less shield termination process for simple harness assembly.
Highly reliable multi-point socket contact structure for vibration resistance.
Selectable insert orientation. Pin or socket insert can be selected based on application requirement.
2 types of receptacles, front mount and rear mount types available.
JB5 Series (Small Size, Push-pull, Waterproof Circular Connector)
Small Size, Waterproof, Panel-to-Cable, Push-pull Mating Structure, Solder Type
特征
Waterproof(mated condition) structure
Waterproof/ dustproof of protection class IP68 prevents penetration of water, oil, dust
Waterproof receptacle itself
Compact
14.8mm dia. available for connectors up to 8 contacts (plug outside diameter: 11mm dia.)
Push-pull mating structure enables easy one-handed insertion and removal.
Jam nut type receptacle. Easy mounting on panel.
Metal outer parts and ground terminal installed in receptacle ensure shield effect.
Polarization
Features on mating components to prevent incorrect mating
Click sound assures completion of mating procedure
Color coded for quick mating
Connector mating life: 5,000 times
JK06 Data Transmission Connector
VG95234 Qualified Circular Waterproof One-touch Bayonet Locking System / Crimp Termination
特征
Mechanical designs are compliant with VG95234 specification
Compliant with the following network communication standards
IP67 rated in mated condition (waterproof in 1m depth for 24hours)
Function and performance are compliant with the following standards European Standard: EN45545-2: 2013
Conduit applicable
Materials selected with ecological consideration
JL02 Series (Rugged, General Purpose, Circular Connector)
Rugged, General Purpose, Panel-to-Cable, Crimp Type
特征
General purpose
Crimp type
Crimp type contacts easy to terminate.
Pin insert/ socket insert
Pin and socket inserts are available for both receptacle and plug
Polarization
Features on mating components to prevent incorrect mating
JL05 Series (Conformed to JIS B 9960-1, Waterproof Connector)
Conformed to JIS B 9960-1, Waterproof, Panel-to-Cable, One-touch Bayonet Lock, Crimp Type
特征
Five insert guide keys for easy mating and unmating
Waterproof(mated condition) structure: Protection class IP67
Sequential connection ensures reliable link with protection circuit.
Crimp termination, Snap-in contact
Pin insert/ Socket insert
Alternative insert position
JL10/W Series (Outdoor Environment Circular Connector)
Outdoor Environment Circular Connector
特征
IP67 water and dust-proof with excellent environmental performance (including corrosion resistance) for outdoor use
Secure mating with a bayonet lock system providing superior operability and efficiency (less screw tightening and no need for torque management)
Mating assurance confirmation through aligned guide marks (white arrows) on the plugs and receptacles
JN1W/JN2W Series (Circular Connector For Industrial Equipment)
Circular Interface Connectors
特征
【JN1W】
15-contact crimp type, available in cable connecting receptacle and flanged cable connecting receptacle versions.
Easy and sure mating with push-in/twist-off type one-touch lock mechanism.
Uses the same crimp contacts as that of the JN1 (10 position relay and panel mount cable relay receptacles).
【JN2W】
The metal outer shell significantly improved the robustness of the connector (three times the strength), while being compatible with JN1W (15 position).
The 15 position uses the same crimp contacts as that of the JN1/JN2 10 position.
15 position: Receptacle is offered with crimp contacts ／Plug is offered with either crimp or solder termination
5 position: All solder termination
5 position is a TUV certified product
Plugs are available in straight and angle types. For the angled type the cable exit direction of the plug can be set in one of four orientations in 90-degree increments.
For the angled plug mating heights are 50.5 mm (5 position) and 42.5 mm (15 position) from the panel surface.
Mis-mating prevention key can be set in one of four positions (5 position).
JN2/W Series (Outdoor Use Waterproof I/O Circular Connector)
Outdoor Use Waterproof I/O Circular Connectors
特征
Easy-to-operate, secure one-touch lock structure with push-to-mate/ twist-to-release operation.
High robustness.
Strong cable retention force.
Dustproof, waterproof: IP67 (when mated)
High corrosion resistance: corrosion resistance of 720 hours in salt spray.
Outdoor type of JN2W Series for industrial application.
Secure robustness and light weight with metallic mating area of outer shell and combination of weather resistant resin parts.
K Series (Solder-type Circular Connector)
Solder-type General Purpose Circular Connector
特征
Specially threaded coupling lock for easy mating and un-mating
Light and robust
Stable contact connection
Close-fit structure
Mis-mating countermeasure
Securing wire holes to prevent un-mating
KD10/KD20 Series Coaxial Connector
Frequency Range to 300 MHz, Simplified Coaxial, Multiple Type
特征
Push-on feature easy to mate and unmate.Simple locking mechanism with polarizing key.
Low profile: 6.1mm high on board
Receptacle with kinked hold-downs.It facilitates temporary insertion/ fitting for soldering.
The central contact of KD20 types are plated with thick gold of 0.3micrometer or more. A higher degree of reliability with two electric contact points.
KN02 Series (All-plastic Rectangular Connector)
All-plastic Rectangular Connector for Industrial Equipment
特征
All-plastic outer shell, light-weight and low-cost connector
EMI shielding with a metal plating applied to outer shell and internally shield components
Easy-to-operate, secure one-touch push-in locking structure
Arrangement of insulator block and insertion orientation allows for optimum pin count and arrangements
Insulator with EMI shielding as an option, to allow for a combination of power and signal lines within a single connector
Plug available in straight and right-angle types
Angle plug optional in 8 cable orientation
KN06 Series (Rectangular Multi-pole Modular Hybrid Connector)
Rectangular Multi-pole Modular Hybrid Connector
特征
Multi-pole, single-engagement operation, lever engagement
Plastic outer shell for weight reduction
Capable of housing up to six modular insulator blocks for various combinations
Lever remains in initiation pre-engagement position while unmated, and provides tactile click when completely mated
Extendable lever structure for ease of mating and retract for connector compactness
Built-in mating key provides up to 32 selectable positions of mis-mating prevention options
KX14/KX15 Series (0.8 mm Pitch, Board-to-Board Connector)
0.8 mm Pitch, SMT, Board-to-Board Connector, Parallel/ Vertical
特征
0.8mm pitch, SMT, Parallel/ vertical
For a wide variety of applications ranging from consumer devices to industrial equipment.
Mating guide for orientating the contacts.
Ribbon type contacts ensure reliable electrical continuity, resisting twisting force of coupling.
Configuration suited for automatic packaging. Sufficient adsorbing face. Terminal length easy to be recognized by image processor.
Friction lock less sensitive to vibration and tensile strength.
KX24/KX25 series (0.8 mm Pitch, Board-to-Board Connector)
0.8 mm Pitch Robust Type with Mating Guide Structure Suitable for Mounting
特征
0.8mm pitch robust type with mating guide structure suitable for mounting
Robust type with mating guide, suitable for rack and panel mounting.
Assuring click response when mated.
Through-hole type board connection available in vertical and horizontal directions.
High contact reliability with long contact stroke.
Non-pin type connector structure durable to twists caused by mating
LY Series (2.0 mm Pitch 2 Row Crimp Connector)
2.0 mm Pitch 2 Row Crimp High-density Low-profile Connectors
特征
2.0 mm pitch, Double row, Crimp, High-density, Low-profile connectors
8.0 mm mounted height (straight type) and 5.3 mm thickness
Combination of box type pin header (straight and right angle) to be secure against breaking-down and twisting of contacts
Cable socket housing (crimp termination type) enable ever higher density packaging of internal circuits in equipment
MJ06 Series (Gigabit Transmission Metric System Connector)
General Purpose Gigabit Transmission Metric System Connector
特征
Compatible with IEC61076-4-101 mounting dimensions. Usage is possible with same standard connector (known as HM connectors).
Pair signal alignment (side pair, 1.8mm pitch) and ground structure, optimized for high-speed differential transmission.
Symmetrical pin structure prevents skew between differential signal pair.
Press-fit attachment to board for both pin side and socket side connector (finished diameter compatible with 0.6mm diameter).
Through-hole location to optimize board wiring pattern.
Compatible with connector height 9mm max. from board, minimum slot distance 17mm.
Available in cable connector type. (Please contact us for more information.)
MX19 Series (Waterproof Cable-to-Cable 040 Contact Connectors)
Small Waterproof 040 Contact Connectors
特征
040 contacts, small waterproof connectors
Cable-to-Cable(relay) application.
Compact, waterproof, Compliant with JIS D0203 S1
Mechanical lock system enabling complete mating with a click.
Mechanical lock system to withstand vibration and tension.
Improved harness assembly and insertion of terminals into housing thanks to a grommet with rear cover.
Rear cover protects the grommet from damage on terminal insertion, withstands cable flaps, and improves waterproof reliability.
Terminals have a two-plate spring mechanism with long beam length, which results in a low force insertion and stress dispersion. The highly reliable contact mechanism can withstand the particular types of vibration caused by an automobile.
MX19A Series (Compatible with 0.35sq Wire Connector )
Compatible with European Standard 0.35sq Electrical Wire
特征
European standard electrical wire FLRY-B 0.35sq compatible.
Automotive compact inline connector.
Mechanical lock system ensures complete and secure mating.
Rear cover protects the grommet from damage at terminal insertion, withstands cable flaps, and improves waterproof reliability.
Frequency Range to 3 GHz, Threaded Coupling (5/8-24UNEF)
特征
A wide variety of products enable various mounting styles.
Environmental rugged construction.
A high degree of reliability provides stable electric continuity and high frequency performance.
Products applicable over 3GHz are available.
NT5 Series (Outdoor Waterproof Connector with Modular Connector)
Outdoor Waterproof Connector with Modular Connector
特征
High robustness with metallic outer shell.
Modular adapter incorporated into receptacle
(Connection for modular plug on both device internal side and plug mating side)
Transmission characteristic: Cat5e
STP (Shielded Twisted Pair cable) compatible
Receptacle can be used as maintenance port with attachable caps
PF/CF Series Optical Connector
Duplex Fiber, Conformed to IEC61754-16 (JIS C 5976)
特征
Conformed to IEC61754-16(JIS C 5976・F07 type)
One-touch operation lever lock and friction lock
PF/CF Series Optical connector (Easy-Disconnect type)
Duplex Fiber, JIS C 5976 (IEC 61754-16) F07 Compatible Product
特征
JIS C 5976 (IEC 61754-16) F07 compatible product.
Push-pull lock mechanism, mating/ unmating is completed by just pushing/ pulling the handle portion.
Easy, one-hand operation of mating/ unmating by using the handle portion.
PS Series Socket (Receptacle Connector for Board-to-Board)
2.54 mm Pitch Socket Receptacle for Board-to-Board Connection
特征
Intermatable with PS series Original pin header
Parallel/ Vertical board-to-board connections
PS Series Crimp Type (2.54mm Pitch, Original Connector)
Single-line and Double-line Connectors Available with 2.54mm Pitch Crimp Type
特征
Supporting vertical and horizontal mounting
Crimp type for easy connection on wire side
Highly reliable socket contact
Equipped with crimp connection device
Socket housing
Pin header also supports board-to-board mounting
PS-LA series (2.54 mm Pitch, Board-to-Cable Connector)
2.54 mm Pitch for Board-to-Wire Connection (Inside Device)
特征
2.54mm pitch for board to wire connection (inside device)
PS series MIL type (2.54 mm Pitch, MIL-DTL-83503, F.R.C. Connector)
2.54 mm Pitch Conforming to MIL-DTL-83503 Standard, F.R.C. Insulation Displacement MIL Type
特征
Board to F.R.C.(Flat Ribbon Cable) connectors, IDC for easy connection
Self-piercing system
Two types of sockets available
Connection protection/ strain relief available
Solder type and press-fit type pin headers available
Two types of pin header levers available
Polarizing key available
PS series SEN type (2.54 mm Pitch, F.R.C. Connector)
2.54 mm Pitch, 2 Rows, F.R.C. Insulation Displacement
特征
Board to F.R.C.(Flat Ribbon Cable) connectors, IDC for easy connection
Lever on pin header for locking/ ejection
PW01 Series (High Efficiency, High Reliability Power Connector)
High Efficiency, High Reliability Power Connector
特征
Pin connector (pin header) is press fit type (finish diameter: 0.82 to 0.98), and the mounting pitch is 2.54mm.
For three contact connector, a wire relay connector is available.
Mold latch ensures complete mating and unmating.
Highly conductive copper alloy is used for contacts, and individual two-point contact system and gold plating ensure high contact reliability. (CA725 is used for press fit contacts.)
Applicable cables are one JIS-C-3316 5.5mm2 (equivalent to #10 AWG) or two JIS-C-3316 2.0mm2 (equivalent to #14 AWG) crimp. For relay pin contacts, AWG 12 to 16 are applicable.
Secondary hook mechanism to secure cable.
QE Series (Lever Engagement, General Use Rectangular Connector)
Lever Engagement Type Connector for General Use Panel-to-Cable/ Board-to-Cable
特征
Lever engagement type connector for general use panel-to-cable/ board-to-cable
QE6 Series (Lever Mating Type, EMI Countermeasure Connector)
Panel-to-Wire/ Board-to-Wire, Crimp and Solder Connection, Lever Mating Type, EMI Countermeasure
特征
Slimmer and smaller
Compatible with 19-inch sub-rack.
64 Key positions available.
Common contacts with our QE series connector.
EMI controlled (40-position version)
Optimal for Ethernet transmission
QX Series (Small, Multiple, Highly Reliable Rectangular Connector)
Small, Lightweight, Multiple, Highly Reliable Rectangular Connector
特征
Small, lightweight
Multiple
Highly reliable
One-touch lock
Crimp type
Frequency Range to 3 GHz (Cable Harness), Threaded Coupling (1/4-36UNS)
特征
A wide variety of products.
Lightweight, compact in size and rugged construction.
A high degree of reliability provides stable electric continuity and high frequency performance.
Products applicable over 3GHz are available. For detail, please consult us.
Frequency Range to 3 GHz, Push-on Coupling
特征
Lightweight, compact in size and rugged construction.
A high degree of reliability provides stable electric continuity and high frequency performance.
Reliable and stable interconnection.
SMB Coaxial Connector (SMT type)
Compact Coaxial Connectors Compatible with IEC60169-10 (Type SMB) Standard SMT Type
特征
Compact coaxial connectors compatible with the IEC 60169-10 (Type SMB) standard.
Compatible with reflow and automatic mounting with vacuum area tape.
Low profile, connector height 6.5mm from board.
Available with and without outer conductor SMT area bosses which prevent connector misalignment during reflow.
Equivalent high frequency performance as conventional through-hole type connectors.
Design concept is based on high-accuracy simulation technology to optimize impedance matching, low reflection and low loss.
SRCN Series (Conformed to JIS C 5432, UL approved Connector)
Conformed to JIS C 5432, UL approved, Panel-to-Cable/ Cable-connecting, Solder Type
特征
Conforms to JIS C 5432 and is UL approved
Miniature and light weight
Threaded coupling
Features on mating components to prevent incorrect mating
Five insert guide keys for easy mating and unmating
Pin and socket inserts are available for both receptacle and plug
Frequency Range to 3 GHz, Threaded Coupling (7/16-28UNEF)
特征
A wide variety of products enable various mounting styles.
Environmental middle size connectors with rugged vibration proof construction.
A high degree of reliability provides stable electric continuity and high frequency performance.
TX24/TX25 Series (1.27 mm Pitch, Board-to-Board Connector)
1.27 mm Pitch, Board-to-Board Connector, Parallel/ Vertical/ Horizontal
特征
1.27mm pitch, parallel/ vertical/ horizontal
Connection between parallel boards spaced 12 to 24mm (2mm increment).
Rugged with mating guide suitable for mounting on rack or panel.
Ribbon type contacts ensures reliable electrical continuity, resisting twisting force of coup
TX24A/TX25A Series (1.27 mm Pitch High-speed Transmission Board-to-Board Connector)
1.27 mm Pitch High-speed Transmission Board-to-Board Connector
特征
Footprint and mating compatibility with the existing TX24/TX25 series.
Robust, and with a mating guide ideal for rack and panel mounting.
Click feeling ensures complete insertion.
High-reliability with long contact stroke length.
Improved electrical characteristics from TX24/TX25 series, supporting higher-speed transmission.
Electrical characteristics of the upper contacts are improved. High-speed signals are arranged in the upper layer.
WR Series (0.5 mm Pitch, Board-to-Board Connector)
0.5 mm Pitch, SMT, Board-to-Board Connector, Parallel/ Vertical
特征
0.5mm pitch, SMT, parallel/ vertical
Right Angle/Parallel Board to Board Connections
9 Varieties 4 to 9mm (.157 to .354") of parallel board to board distance
Metal hold-downs on both ends of right angle type prevent floating up during automatic mounting
PCB area beneath insulator may be used for circuit traces
Available in embossed tape for automatic SMT mounting
3 insulator heights available for straight type.
Ribbon type contacts ensure reliable electrical continuity, resisting twisting force of coupling.
Configuration and geometry suited for automatic packaging.