2 Types of nano SIM card Connectors Achieving Industry's Lowest-in-class Height and Smallest-in-class Dimensions Push-eject Tray Type "SF70 Series" and Push-push Type "SF72 Series" Have Been Developed

As information communication devices such as smartphones continue to get increasingly multi-functional, they are also getting slimmer and smaller in size. Consequently, the demands for nano SIM cards (4FF SIM ) which are smaller than micro SIM (3FF SIM) are increasing more than before.

To meet these demands, JAE has developed the SF70 Series and the SF72 Series nano SIM card connectors with the industry’s lowest-in-class height and smallest-in-class dimensions.

The SF70 Series is a tray type connector with a push-eject structure that enables insertion of the SIM card by placing the card on a tray and inserting the whole tray.
Along with the slimming of devices, SIM card connectors are now more often installed on the rear side of the smartphone, and the tray can be produced by the customers to fit the design of the smartphone.
Also, it achieves a high level of drop impact resistance with an original tray lock structure that holds the SIM card in place without falling out when the phone falls down.
The SF72 Series is a push-push type connector suitable for use when the SIM card is installed inside of the device and it features a good operability with a design that has an enlarged card eject length.

Both the SF70 and the SF72 Series achieve the industry's lowest-in-class height 1.25mm and the smallest-in-class dimensions 196.8mm² (SF70 Series) and 160.7mm² (SF72 Series), and can be selected according to the needs of the customers.

:: Features

[SF70 Series]

Realizes the industry's lowest-in-class height and smallest-in-class dimensions as a tray type.
1.25mm height, 13.3mm width, and 14.8mm depth
Achieves a high level of drop impact resistance with an original tray lock structure.
Structure that enables visual check of terminal area after SMT mounting.
With tray mis-insertion measure and card detection switch (normal open).

[SF72 Series]

Realizes the industry's lowest-in-class height and smallest-in-class dimensions as a push-push type.
1.25mm height, 11.2mm width, and 14.3mm depth
Maintaining good operability with the enlarged card eject length (3.9mm) design by devising the transverse groove side.
With card mis-insertion measure and card detection switch (normal open).

[Features in Common for SF70 Series and SF72 Series]

Enhanced grounding performance with balanced multiple hold-down points for EMI countermeasure.
Pb-free, halogen-free compliant product.
Supports automated mounting with embossed tape.

:: Applicable market

For various hand-held communication devices such as mobile phones, smartphones, and tablet PC.

:: General specifications (In common for both series)

No. of Contacts	:	6 pos.
Rated Current	:	0.5A/ terminal
Rated Voltage	:	10 V/ terminal
Contact Resistance	:	100m ohms max.
Dielectric Withstanding Voltage	:	AC500V r.m.s. for 1 minute max.
Operating Temperatur	:	-25 Deg. C + 85 Deg. C
Durability	:	5,000 times max.

:: Materials and Finishes

[SF70 Series]

Component	Material	Finish
Signal Contact D-SW Contact	Copper alloy	Au plating over Ni (Contact area) Au flash plating over Ni (Terminal area)
Housing	Synthetic resin
Cover Frame	Stainless steel	Au flash plating over Ni (Terminal area only)
Eject Lever	Stainless steel
Eject Bar	Stainless steel

[SF72 Series]

Component	Material	Finish
Signal Contact D-SW Contact	Copper alloy	Au plating over Ni (Contact area) Au flash plating over Ni (Terminal area)
Housing	Synthetic resin
Cover	Stainless steel	Au flash plating (Terminal area only)
Eject Bar	Synthetic resin
Spring	Stainless steel
Cam Follower	Stainless steel

Contact Us

コネクタに関するお問い合わせ

お問い合わせコネクタ（国内）

カスタマサポートグループ（国内のお客様対応窓口）
Tel. 03-3780-2717　Fax. 03-3770-3869

お問い合わせコネクタ（海外）

カスタマサポートグループ（海外駐在のお客様対応窓口）
Tel. 03-3780-2768　Fax. 03-3780-2770

Information and details given here are as of the date of publication.
Please note that the details may be changed.