Request for Connectors manual
Connectors manual download - request transmission completed. The URL link will be sent (from jcs@jae.co.jp) to your chosen email address very soon. Please wait for the email to arrive in your inbox.
If you do not receive a email, it is most likely due to an error in the return email address you have provided above.
Or, usually the problem is a spam filter somewhere along the path and not a lack of response.
Terms of Use
When requesting, receiving, and/or downloading Connectors manual from JAE, you are agreeing to comply with and be bound by the following terms and conditions of use. The terms of use are subject to change at any time without notice.
- Connectors manual provided by JAE may be deleted or revised at any time without notice.
- Connectors manual provided by JAE is meant solely for the use of the original individual the data was requested by.
- Connectors manual provided by JAE is copyrighted by JAE and is not to be altered or shared with outside parties.
- Downloaded Connectors manual is to be used only for dimension confirmations and reference purposes only.
- You acknowledge that such information and materials may contain unintended inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
- Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
- This website contains material which is owned by or licensed to JAE. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
- Unauthorized use of JAE ’s Connectors manual may give rise to a claim for damages and/or be a criminal offence.
- The content of the pages and data provided on this website is for your general information and use only. It is subject to change without notice.
-
JAE does not share your contact information with any outside parties. Your provided contact information may be used for marketing and business operation purposes by JAE. However, you can request to not be included in marketing e-mails, phone calls, mails, etc. by Unsubscribe Form.
- Your provided contact information may be used for marketing and business operation purposes by JAE. However, you can request to not be included in marketing e-mails, phone calls, mails, etc. by Unsubscribe Form.
-
Personal information provided by you shall be used and handled at JAE in strict accordance with the following Privacy Policy:
PRIVACY POLICY
This is an important notice regarding your privacy and the way in which Japan Aviation Electronics Industry, Limited (referred to as “we”, “our”, “us” or “JAE” in this policy) collects and makes use of your personal data. We want to be open and transparent with you, and therefore encourage you to contact us if you have any questions about this policy or the ways in which we use your personal data.
We take our privacy responsibilities seriously and are committed to protecting and respecting your privacy.
This policy sets out the basis on which any personal data we collect from you, or that you provide to us, will be processed by us. Please read the following carefully to understand our views and practices regarding your personal data and how we will treat it.
For the purpose of applicable privacy legislation, the data controller is Japan Aviation Electronics Industry, Limited of 21-1, Dogenzaka 1-chome, Shibuya-ku, Tokyo 150-0043, Japan.
Questions regarding this policy should be directed to LD_Personal_Info_Contact@jae.co.jp . Any questions about the operation of this policy or any concerns that the policy has not been followed should be referred in the first instance to LD_Personal_Info_Contact@jae.co.jp .
-
1.What information do we hold about you?
We may collect, store and use personal data about you (referred to throughout this privacy policy as personal information):- personal information you provide to us via our website, for example, by using this “Request for Connectors manual” form.
- Any personal information you provide to us during your interactions with us.
- Information gathered by cookies used on our website. Our website uses cookies to distinguish you from other users of our website. This helps us to provide you with a good experience when you browse and also allows us to improve the way our website works. For detailed information on the cookies we use and the purposes for which we use them please refer to our Cookie Policy (https://www.jae.com/en/cookies-law/ ).
- Information provided to us by third party service providers we work with, for example, analytics providers.
-
2.How will we use your personal information and what is the legal ground we rely on for doing so?
We will only use your personal information when the law allows us to. When we use your personal information, we must have a legal ground for doing so. The following are (amongst others) the legal grounds by which we can use your personal information:
- Where you have provided us with your consent for us to do so;
- Where we need to perform the contract we have entered into with you or to take steps to enter into a contract with you;
- Where we need to comply with a legal obligation to which we are subject;
-
Where it is in pursuit of our legitimate interests (or those of a third party) and your interests and fundamental rights do not override those interests.
More specifically, we will use your personal information in the following circumstances:
- Your contact details to provide you with information on our products and services. This may include technical information and/or marketing information - in pursuit of our legitimate interests in keeping you informed about our products, services and business updates.
- Dealing with your enquiry made via this “Request for Connectors manual” forms on our website - in pursuit of our legitimate interest to ensure your enquiry is dealt with promptly and efficiently.
- Your contact details to facilitate business between your company and ours - in pursuit of our legitimate interest of daily business with your company.
- To administer our website and for internal operations, including troubleshooting, data analysis, testing, research, statistical and survey purposes - in pursuit of our legitimate interests (to better understand how people interact with our website and solve any issues it may have).
- To transfer to third party service providers - in pursuit of our legitimate interests (in outsourcing for effectiveness and efficiency).
- To contact you if we wish to use your information for a purpose not set out in this policy - to comply with a legal obligation.
- Your contact details to provide you with information on our products and services. This may include marketing information - where you are a consumer and have provided us with your consent for us to do so.
-
3.What happens if there is a change of purpose?
We will only use your personal information for the purposes for which we collected it, unless we reasonably consider that we need to use it for another reason and that reason is compatible with the original purpose. If we need to use your personal information for an unrelated purpose, we will notify you and we will explain the legal basis which allows us to do so.
-
4.Which type of third parties might we share your personal information with?
We require third parties to respect the security of your personal information and to treat it in accordance with the law. For example, where we instruct third party service providers, we carry out due diligence on those providers to ensure they treat your personal information as seriously as we do.
We may share your personal information with the following types of third parties:- Technical support providers, for example, assisting with our website.
- Professional advisers such as lawyers, accountants and business analysts.
- Providers which help us collate and organise information effectively and securely.
- Third party software hosting companies which provide us with software solutions.
- Providers which host our servers in their data centres in UK, USA and Taiwan.
- Cloud storage providers in order to back-up our data.
- Our subsidiaries in order to respond to your requirement effectively.
-
5. Data retention How long will we use your personal information for?
We will only retain your personal information for as long as necessary to fulfil the purposes we collected it for.
We assess the appropriate retention period for different information based on the size, volume, nature and sensitivity of that information, the potential risk of harm to you from unauthorised use or disclosure of that information, the purposes for which we are using that information, applicable legal requirements for holding that information, and whether we can achieve those purpose(s) through other means.
Business contacts- The period we keep your personal information depends on a number of circumstances. For example:
- Where we have collected your personal information during the course of your and our organisations doing business, we will keep your personal information for as long as this business continues, or for as long as we have a commercial interest in holding your personal information, for example, with a view to doing business in the future.
- Where you use our website and one of our cookies are activated, that cookie will operate for the duration set out in our Cookie Policy.
-
6. Where we store your personal data
Electronic versions of your personal information are stored on our servers in Japan. We may also transfer personal data to our servers in UK, USA and Taiwan. We have put in place appropriate safeguards between our Japan and UK entities to provide for the lawful transfer of personal data outside of the European Economic Area.
Where we use third party service providers to assist us, your personal information may also be stored in accordance with their practices and procedures. We require third parties to respect your personal information and to treat it in accordance with the law.
-
7. Rights of access, correction, erasure, restriction, and transfer Your rights in connection with your personal information
Under certain circumstances, by law you have the right to:If you want to review, verify, correct or request erasure of your personal information, object to the processing of your personal data, or request that we transfer a copy of your personal information to another party, please contact LD_Personal_Info_Contact@jae.co.jp .- Request access to your personal information (known as a “data subject access request”). This enables you to receive a copy of the personal information we hold about you and to check that we are lawfully processing it.
- Request correction of the personal information that we hold about you. This enables you to have any incomplete or inaccurate information we hold about you corrected.
- Request the erasure of your personal information. This enables you to ask us to delete or remove personal information when there is no good reason for us continuing to process it. You also have the right to ask us to stop processing personal information where we are relying on a legitimate interest and there is something about your particular situation which makes you want to object to processing on this ground.
- Request the restriction of processing of your personal information. This enables you to ask us to suspend the processing of personal information about you, for example if you want us to establish its accuracy or the reason for processing it.
- Request the transfer of your personal information to another party.
-
8. No fee usually required
You will not have to pay a fee to access your personal information (or to exercise any of the other rights). However, we may charge a reasonable fee if your request for access is clearly unfounded or excessive. Alternatively, we may refuse to comply with the request in such circumstances.
-
9. What we may need from you
We may need to request specific information from you to help us confirm your identity and ensure your right to access any personal information (or to exercise any of your other rights). This is a security measure to ensure that personal information is not disclosed to another person who has no right to receive it.
-
10. Right to withdraw consent
In the limited circumstances where you may have provided your consent to the collection, processing and transfer of your personal information for a specific purpose, you have the right to withdraw your consent for that specific processing at any time. To withdraw your consent, please contact LD_Personal_Info_Contact@jae.co.jp .
Where we are providing you with marketing information, you can also change your marketing preferences by using the unsubscribe button at the bottom of our marketing e-mails sent to you.
Once we have received notification that you have withdrawn your consent, we will no longer process your personal information for the purpose or purposes you originally agreed to, unless we have another legitimate basis for doing so.
-
11. What happens if you fail to provide personal information?
If you fail to provide certain information when requested, we may not be able to perform the contract we have entered into with you (such as providing you with our products or services), or we may be prevented from complying with our legal obligations (such as to ensure the health and safety of visitors to our premises).
-
12. Right to complain
You have the right to make a complaint if you wish to do so. The organisation with oversight of our processing is the Information Commissioner’s Office, which can be contacted in writing at Information Commissioner’s Office, Wycliffe House, Water Lane, Wilmslow, Cheshire, SK9 5AF, by telephone (0303 123 1113) or by e-mail (casework@ico.org.uk ).
-
13. Changes to this privacy notice
We may change, modify, add or remove portions of this policy at any time, and any changes will become effective immediately.
Any changes we make to our privacy policy will be posted on this page and, where appropriate, notified to you.
-
1.What information do we hold about you?
Memory Card Connectors
Series Comparison
ST12 Series (microSD™ Memory Card Connector)
microSD™ Memory Card Connector
Features
Push-push type connector for microSD card compliant with UHS-I
1.4mm height, 14.6mm width, and 15.3mm depth (depth including card: 16.7mm)
Good operability with 0.7mm push stroke and 3.8mm card eject length
Card insertion detection switch (normally open)
Robust mounting with multi hold-downs. (*)
Strong mechanical lock structure: Resistant to vibration and shock
Soldering area of terminals are located on the outside of connector body for easy inspection and repair
SG50 Series (Rugged Full-Size SD Card Connectors Compatible with UHS-I and UHS-II)
Rugged Full-Size SD Card Connectors Compatible with UHS-I and UHS-II
Features
UHS-I, UHS-II compatible high-speed data-transfer memory
The card ejection method is push-push type.
2-point contact structure with high contact reliability
Mechanical lock structure for vibration and impact resistance
Structure to prevent incorrect insertion of the card
Card detection switch
JC26C/JC26C2 Series (CF Card Connector)
CF Card Connector
Features
Small, low profile, 5.8mm height on board (basic type, board face mount type).
Type with stand-off(1.6㎜2available, 7.4mm height on board. Other parts can be installed under eject frame.
Board face mount type and board back mount type (reverse type).
Eject mechanism of card (pushing on both sides). The card is surely ejected.
Eject button in the left or right.
Type with retractable eject button is available. It avoids damage to the portable machine.
JC26E Series (CF Card Connector)
CF Card Connector
Features
Slot structure that complies with CFA(Compact Flash Association) TYPE I/ II.
Mechanical strength has been improved by anchoring the frame and base with screws.
The board mounting space is the same as on the existing JC26C series.
The eject button is of the space saving W-push type.
Compatible with 0mm stand-off. (Please contact us regarding stand-off product.)
Compatible with both standard and reverse types.
The button position (right or left) can be selected.
SF11 Series (GSM 11.11 Plug in SIM Card Connector)
Plug in SIM Card Connector Compatible to GSM 11.11 Standard, Tray Type
Features
Plug in SIM card connector compatible with GSM 11.11 standard.
Low profile, 1.9mm height.
Available with and without card detection switch.
Connector main body is provided in embossed tape packaging (compatible with second reflow).
Card tray is ejected by inserting an eject-pin.
Lock structure holds tray in place and gives a clear click feeling when the tray is fully mated.
SF15 Series (microSIM Card Connector)
microSIM Card Connector
Features
Slim design: 1.55mm height, 13.95mm width, and15.60mm depth
Easy-to-operate hinge mechanism allows access from above connector
Good EMI performance with 5 grounded hold-down points
Lock structure that prevents opening of the cover if the device is dropped
Supports automated mounting --- supplied in embossed tape
SF53 Series (Micro SIM Card Connector)
Micro SIM Card Connector
Features
1.45mm height, 12.90mm width, and 15.45mm depth.
Prevention structure for contact buckling and deformation problem in use of a card adaptor or by insertion of micro SIM card at an angle.
Mis-insertion prevention measures due to reverse or slanted insertion of the card
Placed six hold-down points in balance for good EMI performance.
Pb-free, halogen-free compliant product.
Supports automated mounting with an embossed tape.
SF56K Series (microSIM Card Connector)
microSIM Card Connector
Features
Compact and slim design
Good operability with long card eject length of 4.1mm.
Incorrect card insertion countermeasure
Reverse insertion prevention
Card mating detection switch (normally-closed type)
Contact buckling prevention structure that prevents deformation of the contacts even if an empty card adapter is inserted.
EMI countermeasure
SF58 Series (microSIM Card Connector)
microSIM Card Connector
Features
microSIM card connector
1.3mm height, 15.5mm width, 16.35mm depth, low-profile and space saving type
Card detection switch (Normal open) for preventing incomplete insertion
Design allows for visual check of the terminals after the SMT mounting process
High level of drop resistance with an original tray lock structure
Lead-free, halogen-free compliant product
Supports automated mounting with embossed tape
SF7 Series (Plug in SIM Card Connector)
Plug in SIM Card Connector with Hinge Cover
Features
Supports GSM 11.11 standard compliant Plug in SIM Card for European digital mobile phones.
Molded component has a card mis-insertion prevention mechanism.
Adsorption area for SMT and automated mounting. Supply with embossed tape available.
To complete friction lock, insert the card into the cover, then slide the cover. Easy operation hinge slide lock mechanism.
The cover can be full-flat (bendable from 0 degree to 180 degrees) so that the connector can fit any design of mobile phone.
[Type without card detection switch]
2.3mm height, 30mm long, 17.2mm width low-profile and compact type
Configured with positioning bosses and board mis-insertion prevention mechanism using different diameter bosses. Available with and without positioning boss.
[Type with card detection switch]
2.5mm height, 30mm long, 17.2mm width low-profile and compact type
Card insertion detection switch system is a highly reliable complete insertion detecting function that will operate only when the card is inserted and completely installed by the sliding cover.
Without positioning boss.
SF70 Series (nano SIM Card Connector)
nano SIM Card Connector
Features
Smallest-in-class dimensions including height --- 1.25mm height, 13.3mm width, and 14.8mm depth.
Superior resistance against drop with original lock structure.
Card mis-insertion measure, card detection switch (normal open).
Supports automated mounting --- supplied in embossed tape.
EMI countermeasure --- balanced 7 hold-down points.
Lead-free, Halogen-free and RoHS compliant
SF72 Series (nano SIM Card Connector)
nano SIM Card Connector
Features
Smallest-in-class dimensions including height --- 1.25mm height, 11.2mm width, and 14.35mm depth
Good operability with enlarged card eject length (3.9mm)
Card mis-insertion measure that does not lock if card is mis-inserted
Contact structure that prevents them from being damaged if a card is inserted at an angle
Buckling-free contact structure for cards with gaps or uneven surfaces
Card detection switch (normal open)
EMI countermeasure --- balanced 8 hold-down points
Supports automated mounting --- supplied in embossed tape
SF78 Series (Dual nano SIM Card Connector)
Dual nano SIM Card Connector
Features
Compact and slim design --- 1.3 mm height, 17.5 mm width, 21.4 mm depth
2 nano SIM cards can be installed in one connector
Card mating condition --- With card detection switch (normally-closed types)
Contact buckling prevention structure that prevents deformation of the contacts even if an empty card adapter is inserted
Mechanical lock structure that holds tray in place in case device is dropped
Tray mis-insertion countermeasure to prevent insertion of tray upside down.
Compatible with nano SIM Cards that are manually cut to size by user
SF8 Series (GSM 11.11 Plug in SIM Card Connector)
Plug in SIM Card Connector Compatible to GSM 11.11 Standard, Tray Type
Features
Tray type connector for GSM 11.11 standard Plug in SIM card
Low profile structure, 1.55mm height, 16.65mm width, 19.3mm depth(26.2mm when card is inserted)
Mounting type: Normal (A type).
Connector main body is provided in emboss (compatible to second reflow), tray provided in tray (tray is attached after mounting the main body).
4portions of hold-downs ensures EMI/ESD countermeasure and gives consideration to prevention of instantaneous interruption caused by falling.
Retention lock on tray provides click feeling when mated, and makes positioning easier and also prevents falling of tray.
SF9 Series (GSM 11.11 Plug in SIM Card Connector)
Plug in SIM Card Connector Compatible to GSM 11.11 Standard, Tray Type
Features
Tray type connector for GSM 11.11 standard Plug in SIM Card
Low profile structure, 1.8mm height, 18.9mm width, 22mm depth(26.5mm when card is inserted)
Mounting type: Normal
Connector main body is provided in emboss (compatible to second reflow), tray provided in tray.
5portions of hold-downs ensures EMI/ ESD countermeasure and gives consideration to prevention of instantaneous interruption caused by falling.
Retention lock on tray provides click feeling when mated, and makes positioning easier and also prevents falling of tray.
ST1 Series (microSD Card Connector)
microSD Card Connector
Features
Push-slide hinge type connector for TransFlash/microSD Memory Card.
Shield characteristic is secured by the 4 ground connection points set up on the hinge cover
Compact, low profile designed with 2mm height, 16.3mm depth and 14.15mm width.
ST1-G/T Series (microSD™ Small Memory Card Connector)
microSD™ Small Memory Card Connector
Features
Push-slide, hinge type connector for microSDTM small memory card
Available with card insertion detection switch (T type), and without (G type)
Shield feature is secured by 4 ground connection points on hinge cover
Slim design with 1.4mm height, 15.5mm depth, 11.9mm width
Lock structure to prevent the cover from opening when dropped
ST11-H Series (microSD Card Connector)
Low Profile Push‐push microSD Card Connector
Features
Push-push type connectors for the microSD memory card standardized by SDA
Slim design with 1.3mm height, 13.4mm width, and 15.3mm depth (depth including card: 17.0mm)
1.0mm push stroke, 3.4mm card eject length, maintaining good operability.
Card insertion detection structure (D-SW), normally closed type.
Balanced EMI countermeasure with 7 hold-down points.
Countermeasure to prevent the card from popping out.
Lead-free, Halogen-free compliant product.
Supports automated mounting with embossed tape.
ST19 Series (3-in-2 Type Card Connector)
3-in-2 Type Card Connector (For nano SIM + nano SIM / microSD Cards)
Features
Compact and slim design --- 1.3 mm height, 17.49 mm width, 28.15 mm depth
Compatible with two patterns: Combination 1) nano SIM card x 1 pcs. + microSD card x 1 pcs., Combination 2) nano SIM card x 2 pcs.
With tray detection switch (normally-closed type)
Contact buckling prevention structure to avoid deformation of the contacts even if an empty card adapter is inserted.
Tray mis-insertion countermeasure to prevent insertion of tray upside down.
Compatible with thickness of nano SIM Cards that are manually cut to size by user.
ST50 Series (UHS-II Compatible microSD Card Connector)
UHS-II Compatible microSD Card Connector
Features
Compatible with microSD card Ultra High Speed data transfer standard UHS-II
Compact slim design, 16.3 mm depth, 13.7 mm width, 1.35 mm height
Push-push type card eject method
Maintaining good operability with the long card eject length (3.0 mm min.)
Includes card detection switch (normally-closed types)
8-point hold downs for heat-emission