Top of the Page

Link to Site Map
Go to the Text ( c )

The main part starts from here.

Environmental Report 2021

Environmental Targets and Activity Results

In an effort to lower its environmental impact and promote the production of environmentally friendly products, the JAE Group works under ISO14001 certification. Respecting the autonomy of each site, it sets goals and objectives on an annual basis, and carries out activities as the JAE Group in Japan in accordance with medium-term plans. In fiscal 2020, its main activities were as shown in the table below.
 Energy-conservation and material-conservation are achieved by improving both production efficiency and quality. Not only did we benefit from activities such as resource recycling, including the recycling of chemical substances and the recycling of waste material and conversion of it into a valuable resource; we also reduced costs and further promoted environment management.
 Improvements to the energy use primary unit carried out to fight climate change — i.e., higher energy use efficiency relative to production output — meant that we far exceeded our Phase 1 targets for the low-carbon-society plan. We will consider a transition to renewable energy while promoting efficient energy use in order to continue raising the efficiency of our manufacturing activities.

*Click the blue text to open each related environmental performance category.

Activity Activity goal Target value Result Evaluation
Measures against climate change Improvement on energy usage per unit 7.73% or more 22.90%
Reduction of energy consumption (crude oil equivalent) 4231 kL or more 5500kL
Reduction of CO2 emissions caused by materials production by cutting materials usage 1654 ton-CO2 or more 2115
ton-CO
2
Supply chain management Checking of environmental quality at suppliers 383 companies or more 393 companies
Eco-friendly products Adherence to Green Procurement Guidelines in component selection 100% compliance 100% implemented
Reduce use of chemical substances
and
raw materials
Reduction of the amount of metal used through improvements to the gold plating process (JAE) 10% or more reduction 12.05%
Reduction of chemical substances through the injection of an appropriate amount of chemicals in waste liquid disposal (HAE) 50% or more 50%
Reduction of the use of harmful chemical substances (SAE) 10% or more 74%
Effective use of materials per facility by changing the cutting method of plate material (FAE) 0.17kg or more 0.27kg
Using rainwater to flush toilets (JAE PH) (Unable to determine because it is rainwater) 1,269m3
Reducing water consumption per person annually (JAE WX) 10.08 tons or less 10.08ton
Preventing chemical leakage (JAE WJ) Leakage 0% 0%
Reuse of water from plate washing tank(JAE TW) 19,008ton 19,200ton
Improvement of molded waste value (HAE) 73% or more 74.2%
Zero emissions Recycling of cleaning fluid and waste fluid (YAE) 25% recycled or more 27.5%
Conversion of metal waste into a valuable resource (FAE) 241 kg or more 65.9kg
Reduction of landfill waste (JAE OR) 3% or more 55%
Reduction of waste (JAE TJ) 5% or more 20%
Recycling waste wood and pallets (JAE TW) 12 tons or more 16ton